Chapter 2 Installation And Wiring; Check The Inverter - Hitachi SH1 Series Basic Manual

Chapter 2
Chapter 2
Installation and Wiring

2.1 Check the Inverter

Check the contents in the package, and confirm the
inverter model with a specification label.
Inverter
The model of the product is as follows:
E.g.: 400V class input voltage for Japan
Applicable motor capacity for ND rating is5.5kW
ND rated current 14.8A
LD rated current 16.0A
VLD rated current 17.5A
00175
SH1 -
(1) (2)
(1) Series name SH1
(2) Motor maximum rated current (at VLD rated current
00001: 0.1A to 99999: 9999.9A
(3) Input power specification
L: three-phase 200V class;
H: three-phase 400V class
(4) Panel
B: no operator keypad equipped;
F: panel equipped
(5) Region (None): Japan;
E: Europe/Southeast Asia;
U: North America;
C: China

In case of (None), blank field is omitted.
(6) Integrated noise filter
F: integrated noise filter equipped;
CB: conduit box equipped

When both F and CB are equipped, it is indicated as
FCB.
•
Specification label example
Description example for SH1-00175-HFF
(*) means eigenvalues
Inverter model
Input ratings
(Frequency/voltage/No. of
phases/Current)
Output ratings
(Frequency/voltage/No. of
phases/Rate current)
MFG No.; factory serial No.
Basic Guide
(This document)
- H F F
(3) (4) (5) (6)
Wire separation plate
Backing plate
Model:
Input/Entrée :50Hz,60Hz 380–460V 3ph ** /** /** A
Output/Sortie : 0- 590Hz 380–460V 3ph ** /** /** A
MFG No. 7617****** 00001
Hitachi Industrial Equipment

Configuration and description contents vary
depending on the model.
Refer to User's Guide for more details.

If the inverter is shipped incorporated with optional
products, optional instruction will be enclosed.

SH1-00126-HFCF example illustration in below.
Optional slots
 Refer to each optional product
instruction for detail.
Operator keypad
USB (Micro-B)
Control circuit
terminal block
Terminal block cover
INVERTER
SH1-00175-HFCF
HINC
（Nanjing）Co.,Ltd.
2-1
Installation and Wiring
Eye bolts for hanging the inverter
SH1-00930H(SH1-370H)～
SH1-03160-H(SH1-1320H)

Heat sink
Main circuit
terminals
Specification label
Ver.2.00
7.5/7.5/5.5
Date:****
NE18404-***