Overview Of Each Chapter - Hitachi WJ Series User Manual

Chapter 2
2.1.2

Overview of Each Chapter

 This Guide consists of the following chapters:
Refer also to the chapter to be referred to for each part of the inverter appearance drawing on
the next page.
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapter 11
Chapter 12
Chapter 13
Chapter 14
Chapter 15
Chapter 16
Chapter 17
Chapter 18
Appendix
Outline of This User's Guide/Procedure for Operation
Chapter
Safety Instructions/Risks
Outline of This User's Guide/
Procedure for Operation
Main Body of the Product
Installation
Wire Connection
Operation Check/Residual Risk
Keypad and Related Functions
Mandatory Setting for Motor
Drive and Test Run
Inverter Functions
Monitor Functions
RS485 Communication
ProDriveNext/EzSQ
Option Board
Safety Function STO
Tips/FAQ/Troubleshooting
Maintenance and Inspection
Specifications/Dimensions/Der
ating
List of Parameters/Modbus Coil/
Register Numbers
Additional technical information,
glossary, index, revision history, etc.
Describes safety precautions for installation,
wiring, operation, maintenance, and
inspection.
Describes the people who will read this
Guide and the purpose of this Guide.
Also describes the overall flow from
installation to test run, the flow chart for
driving the motor, and related reference
points.
Describes the contents of the inspection at
the time of purchase, the package, the
product model, the contents of the
specification label, and the appearance of
the product.
Describes the installation of the inverter,
installation environment and precautions for
installation.
Describes the wiring of the inverter and input
power supply, the motor and applicable
peripheral equipment, and the wiring of the
I/O signals for control.
Describes the residual risk checklist for
inverter operation.
Describes how to operate the main unit
keypad and related functions.
Describes the settings required to drive the
motor and test run.
Describes the functions available with the
inverter.
Describes various data that can be
monitored by keypad, remote operator, etc.
Describes the communication function using
Modbus-RTU(RS485) communication. For
the coil/ register number used by Modbus
communication, see "Chapter 18 List of
Parameters/ Modbus Coil/Register
Numbers".
Describes the outline what can be done by
connecting WJ-C1 to a computer.
Describes applicable option boards.
Describes an overview of using the safety
function STO.
Describes the inverter error status, warning
status, and troubleshooting.
Describes how to perform maintenance and
inspection.
Describes the specifications and dimensions
of this product and current derating
characteristics.
Describes the monitor and parameter list.
Coil/register numbers for Modbus
communication are also described in this
chapter.
The following contents are described.
"Replacement from WJ200", "Glossary",
"Index", "Revision History", etc.
2-1-2
Overview