Chapter 9
9.1.6
Operation by Communication Option Board
How to operate the inverter using communication option board?
Q
To perform forward/reverse rotation and stop operation using the communication option board,
A
set the "RUN command input source selection [A002]
Guides for each communication option board.
Code
RUN command input
*1
[A002]
source selection
*1. "2nd-motor control [SET]" target parameter. The second control parameter is also subject to setting.
For the inverter to start operation, a frequency command is required in addition to a RUN
!
command.
Item
Commands from the option board are used to start
and stop inverter operation.
9-1-6
Inverter Functions
*1
" to "Option (04)". For details, refer to the
Description
Data
04