Functions Related To Keypad; Restrict Display Parameter - Hitachi WJ Series User Manual

Chapter 7

7.2 Functions Related to Keypad

7.2.1

Restrict Display Parameter

 How can display only the necessary parameters?
Q
 How can display fewer parameters?
 How can display only the changed parameters?
 Parameters displayed in the keypad can be partially hidden by setting "Display restriction
A
selection [b037]".
 To show all parameters, set [b037] to "Full display (00)".
 To display parameters that have been changed from the values at initialization, set [b037] to
"Data comparison display (03)".
 [b037] setting can be password protected. For details, see "7.2.4 Protecting Data with
Passwords".
Code
Display
[b037] restriction
selection
User-parameter 1
[U001]
selection to
to
User-parameter
[U032]
32 selection
■ Details of each setting of "Display restriction selection [b037]"
"Display restriction selection
[b037]" setting
Full display (00)
Function-specific display (01)
User Settings (02)
Data comparison display (03)
Monitor only (05)
Item
Full display (initial value)
Function-specific display
User settings (Parameters set in [U001] to [U032] and
[d001], [F001], [b037], [b190] and [b191] are
displayed.)
Data comparison display
Monitor only ([d ***], [b037], [b190] and [b191])
No registration
Register the parameter code to be displayed.
Up to 32 parameters can be registered.
Displays all parameters.
Use this when you want to hide the parameters of unused functions
and display fewer parameters. If a specific function is not selected, the
parameters associated with that function are hidden.
Refer to the table on the next page for details of display conditions.
Use to display only arbitrary parameters set by the user.
Up to 32 arbitrary parameters can be registered in "User-parameter 1
to 32" ([U001] to [U032]).
When "Display restriction selection [b037]" is set to "User settings (02)"
after registration, only parameters registered in [U001] to [U032] and
[d001], [F001], [b037], [b190] and [b191] are displayed.
Used to know the parameter changed from the factory setting.
All monitor displays [d ***] and [F001], [b037], [b190] and [b191] are
also displayed.
Only all monitor displays [d ***], [b037], [b190], and [b191] are
displayed.
Keypad and Related Functions
Description
Details
7-2-1
Data
00
01
02
03
05
no
[d001]
to
[P196]