Table of Contents
Advertisement
The More/Less Bar can be used to reduce the number of parameters shown in the display.
The Speed parameter is active in this view. The operator can change the speed of test without returning to the
Configure Viscosity Test screen.
TIP: If the speed is changed during the execution of a saved test, then the test status will be changed to "Unsaved
Test". This will also be reflected if the collected data is saved.
View Test includes the Stop Test command key and a Back Arrow navigation key. The Back Arrow is used to return
the display to the Running Viscosity Test view.
3.14 Results
Measurement data is viewed in the Results screen. This screen is presented at the conclusion of a test or when data
is loaded through the View Results selection from the Home Menu.
The DVNext utilizes a comprehensive data format. Data files include the complete set of measurement results and
calculated values along with the test protocol. All elements of the test can be viewed in the Results screen.
The DVNext Rheometer allows for 5000 total data points per file. When viewing large data files, additional time is
required when moving from the various Results options listed below. There may be some delay on the screen while
the DVNext prepares the data.
The Results screen includes several Navigation Icons and Command Keys.
Home:
Down Arrow:
Blue Arrow:
Print:
M19-2101 REVISION 2.0
Figure 3-43
Return to the Home Menu.
Select Results Options.
Select Page of Results Table.
Print Data to USB printer.
D V N E X T R H E O M E T E R - O P E R AT I O N A L M A N U A L
46
Advertisement
Table of Contents
