DVPlus Firmware Update
Steps to update firmware
WARNING: It is critical to only install Firmware intended for the DVPlus on your
instrument. Please ensure that no other .fwu files exist on your USB Flash Drive
and that the only firmware files that exist are those you are trying to install.
1.
Insert a USB Flash Drive (FAT32 Format) with the Firmware Update loaded in the root folder into the USB A
Port on the back of the DVPlus. DO NOT Remove the USB Flash Drive at any point during the upgrade.
2. Turn the DVPlus On.
3. Level and AutoZero accordingly.
4. Go to Settings Menu and select Firmware Update.
Settings
DVPlus_FirmwareUdpate_Aug2024_Eng
(800) 628-8139 or (508) 946-6200
brookfieldengineering.com
USB Port A
Firmware Update
©2024 AMETEK Brookfield. All rights reserved
Need help?
Do you have a question about the BROOKFIELD DVPlus and is the answer not in the manual?
Questions and answers