Table of Contents
Advertisement
When completed, your FileZilla Server window should now look something like Figure 16 shown below.
Figure I- 16: FileZilla Server start
Note, there is no means provided to change the port number of the DVNext, it is preset to be 21. This means that you
must make sure that the FTP server is set up on port 21 ONLY (it is usually like this by default). To check this, go to
the "Edit" dropdown menu in the top-left corner and click the "Settings" option as shown in Figure I- 17.
Figure I- 17: FileZilla Settings
After clicking "Settings" from the "Edit" dropdown menu, FileZilla Server Options window will pop up (Figure I- 18).
Make sure you are in the "General settings" tab (default tab for FileZilla Server Options). Click the field next to
"Listen to these ports:" and enter in "21" if it is not there already (Figure I- 18). Also in the same tab, change the
"Connections timeout:" and the "No Transfer timeout:" fields under "Timeout settings" to 0 so FileZilla Server never
times out (Figure 18). When done, press the OK button at the bottom left of the window (Figure I- 18).
Figure 18: Changing General Settings
M19-2101 REVISION 2.0
D V N E X T R H E O M E T E R - O P E R AT I O N A L M A N U A L
123
Advertisement
Table of Contents
