Set Communication - ADF Web AXIS HD67576-A1 User Manual

Industrial Electronic Devices

SET COMMUNICATION:

This section defines the fundamental communication parameter of two buses, PROFIBUS and Ethernet.
By pressing the "Set Communication" button from the main window for SW67576 (Fig. 2) the window
"Set Communication" appears (Fig. 3).
The window is divided in two sections, one for the PROFIBUS and the other for the Ethernet.
The means of the fields for "PROFIBUS" are:
In the field "ID Dev." The address of the PROFIBUS side is defined;
In the field "Baud rate" the baud rate for the PROFIBUS side is defined;
The means of the fields for "Ethernet" are:
In the field "IP ADDRESS" insert the IP address;
In the field "SUBNET Mask" insert the Subnet mask;
If the "GATEWAY" field is checked it is possible to insert, in the field under, the IP Address for
going out to the net;
In the field "Port" insert the number of the port;
In the field "COMPANION BOARD IP
device that communicates with the HD67576;
In the field "COMPANION
communicates with the HD67576.
ADFweb.com Srl – IT31010 – Mareno – Treviso
ADDRESS" insert the IP address of the Ethernet Server
Port" insert the number of the port of the Ethernet Server device that
User Manual PROFIBUS Slave / Ethernet - Converter
Document code: MN67576_ENG
Figure 3: "Set Communication" window
INFO: www.adfweb.com
Revision 2.002 Page 12 of 29
Phone +39.0438.30.91.31