Set Communication - ADF Web Axis HD67838-B2-Y User Manual

Industrial Electronic Devices

SET COMMUNICATION:

This section define the fundamental communication parameters of DMX and DALI buses.
By Pressing the "Set Communication" button from the main window for SW67838 (Fig. 2) the window
"Set Communication" appears (Fig. 3).
The means of the fields for the "DMX" section are:
In the field "DMX" the direction of the communication is defined;
In the field "Channel Number" the number of DMX channels is defined.
The means of the fields for the "DALI" section are:
In the field "DALI Console
The means of the fields for the "Ethernet" section are:
In the field "IP ADDRESS" the IP address of the converter is defined;
In the field "SUBNET Mask" the SubNet Mask is defined;
In the field "GATEWAY" the default gateway of the Ethernet network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going out of
the net.
ADFweb.com Srl – IT31010 – Mareno – Treviso
Port" the UDP port used for Ethernet communication is defined.
User Manual DALI / DMX
Document code: MN67838_ENG
Figure 3: "Set Communication" window
INFO: www.adfweb.com Phone +39.0438.30.91.31
Revision 1.000 Pagina 17 di 38