3.6.2.2
Record Schedule
This menu allows you to specify when the HVR records video and defines the recording mode for each channel. The
recording schedule lets you set up a schedule like, daily and hourly by normal (continuous) recording, motion recording,
I/O alarm recording & PIR recording (if your HVR supports). To set the recording mode, click first on the mode radio button
(Normal, Motion, Alarm, PIR, Intelligent Analysis), then drag the cursor to mark the slots. The recording schedule is valid
only for one channel. If you want to use the same recording schedule for other channels, use Copy function. Click Apply to
save your settings
Channel: Select the channel to set its recording parameters.
•
Normal: When the time slot is marked green, this indicates the channel performs normal recording for that time
•
slot.
Motion: When the time slot is marked yellow, this indicates the channel records only when a motion is detected
•
during that time slot.
IO: When the time slot is marked red, this indicates the channel records only when the sensor is triggered during
•
that time slot.
PIR: When the time slot is marked violet, this indicates the channel records only when the sensor is triggered
•
during that time slot.
No Record: A time slot marked black means that there is no recording scheduled for the time slot.
•
After you complete the schedule you activate it by clicking the [Save] button.
You can also click on the Default button to use the system defaults.
DS1097-010
48