3.8
ADVANCED
Two functions are available in the Advanced section. These are:
Maintain
Events
3.8.1.1
Maintain
Click on Maintain in the side menu to open the page shown in the following figure on which you can set some operating
modes of the DVR and perform system maintenance operations.
Default User: If this setting is set to "Admin" (i.e. as Default), the Cameras are shown after DVR initialising with
•
admin password enabled. If this setting is set to "OFF", the Cameras are not shown after DVR initialising with
admin password enabled.
Auto Reboot: you can also set system auto reboot regularly (daily/weekly/monthly) as per user's need.
•
Upgrade: Decompress update file package and copy the upgrade file folder named "hdvrupgrade" (see Picture
•
above, the upgrade program is inside) to root directory of USB flash disk; Insert the USB flash disk into USB port
of DVR; Click <Upgrade>.
DS1093-520
54