Table of Contents
Advertisement
•
Log Sweep/Step Sweep:
After the sweep time is modified, the instrument will sweep from the specified "Start
Frequency" again.
7.5
Start/Stop Hold Time
Start hold time specifies the time for the sweep to remain at the "Start Frequency".
After the start hold time expires, the generator continues to sweep at varied
frequencies according to the current sweep type.
Stop hold time specifies the time for the sweep to remain at the "Stop Frequency"
after the generator sweeps from the "Start Frequency" to the "Stop Frequency".
You can click or tap the Start/Stop input field and use the pop-up numeric keypad to
set the start/stop hold time. The default start/stop hold time is 0 s and the resolution
is 1 ms. The time ranges from 0 s to 3600 s and is related to the sweep type, trigger
source, return time, and sweep time.
Time + Stop Hold Time:
•
Linear Sweep:
-
-
•
Log Sweep/Step Sweep:
After the start/stop hold time is modified, the instrument will sweep from the
specified start frequency again.
7.6
Return Time
Return time specifies the time to return from the "Stop Frequency" to the "Start
Frequency".
Click or tap the Return input field and use the pop-up numeric keypad to set the
return time. The default return time is 0 s and the resolution is 1 ms. The time ranges
from 0 s to 3600 s and is related to the sweep type, trigger source, start hold time,
stop hold time, and sweep time.
Stop Hold Time:
•
Linear Sweep:
-
-
•
Log Sweep/Step Sweep:
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
T
≤ 500 s
P
T
Internal trigger:
+ 1 ms ≤ 8,000 s
P
Manual trigger/external trigger:
T
≤ 500 s
P
T
T
Internal trigger:
+ 1 ms ≤ 8,000 s
P
Manual trigger/external trigger:
T
≤ 500 s
P
T
= Sweep Time + Start Hold Time + Return
P
T
≤ 250,000 s
P
= Sweep Time + Start Hold Time + Return Time +
P
T
≤ 250,000 s
P
Sweep
DG900 Pro User Guide
65
Advertisement
Table of Contents
