Table of Contents
Advertisement
Number Format
You can set the display format of the decimal point and thousands separator in
number parameters. This setting is stored in the non-volatile memory. It is not
affected by the "restore factory defaults" operation.
•
Decimal Point: click or tap the Decimal drop-down button to select "." or ",".
The default setting is ".".
•
Thousands Separator: click or tap the Separate drop-down button to select ".",
",", "Space", or "None". They cannot be set to "." or "," at the same time.
Brightness
Click or tap the Brightness input field to set the brightness of the display.
Beeper
Click or tap the Beeper on/off switch to turn on or off the beeper. When it is on, you
can hear the beeper sound when operating the instrument or an error occurs.
Date and Time
Click or tap the Show Time on/off switch to turn on/off showing the date and time
on the screen. When it is on, the system time is displayed in "hh:mm" format, and the
date is displayed in "yyyy-mm-dd" format in the Notification Area at the lower-right
corner of the screen. You can self-define the system date and time.
•
Date: click or tap the Date input field and the date setting menu is displayed.
Adjust the date and then click or tap OK to complete the date setting.
Otherwise, click or tap
•
Time: click or tap the Time input field and the time setting menu is displayed.
Adjust the time and then click or tap OK to complete the time setting.
Otherwise, click or tap
17.4
About this Instrument
In Utility menu, click or tap About, and then you can view the model, version, and
other information about this instrument.
•
Model
Indicates the product model.
•
Serial number
Indicates the serial number of the product, the unique identification for the
product.
•
Calibration Date
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
to close the menu and cancel the modifications.
to close the menu and cancel the modifications.
System Utility Function Setting
DG900 Pro User Guide
101
Advertisement
Table of Contents
