Rigol DG900 Pro Series User Manual page 27

- Sound icon: In the "Utility" menu, click or tap Setup > Beeper to enable or
disable the sound. When on,
displayed.
- Remote control icon: When the instrument is in remote control mode,
be displayed.
- Date and Time: When the "Show Time" is set to On, the system date and time
will be displayed.
5. Print Screen Key
Click or tap this key to capture the current screen and save the picture to internal
memory.
6. Store/Recall Key
Click or tap the key to open the storage setting menu.
7. Align Phase Key
Click or tap the key to perform the phase alignment operation. For details, please
refer to
8. Channel Copy Key
Click or tap this key to open the channel copy menu. You can copy all states and
waveforms of one channel to the other one. For details, please refer to
Copy
.
9. Counter Label
Displays the frequency value and period value measured by the counter. When the
counter is turned on, this label is illuminated and displays the frequency and
period measured by the counter.
10. Channel Tab
Displays the sync on/off status and polarity for the corresponding channel. You can
click or tap this tab to switch to the channel setup interface.
11. Channel Labels
Display the channel on/off state (the "CH1"/"CH2" is illuminated or not), the
selected channel (the label is highlighted or not), the impedance, and invert on/off
setting. You can click or tap the label to select the specified channel.
12. Function Navigation Icon
Click or tap the icon to open the function navigation menu in which you can
access the specified function menu by clicking or tapping the corresponding
function key (Utility, Preset, Help, Coupling, Shut Down).
13. Waveform Tab
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Align Phase
.
will be displayed; when off,
Quick Start
will be
will
Channel
DG900 Pro User Guide
19