Sequence
9
Sequence
A sequence is a combination of multiple individual waveforms in order. In Sequence
mode, you can self-define the sequence and save the edited sequence to internal
memory or external storage device (*.seq format).
Click or tap the "Output Mode" drop-down button to select "Seq" to enter the
Sequence Setting Interface, as shown in the figure below. You can click to tap one of
the tabs at the bottom to access the Sequence Setting Interface or Channel Setup
Interface. For Channel Setup Interface, please refer to
only describes the sequence settings.
TIP
The Sequence mode on/off status of CH1 and CH2 is always synchronized.
9.1
To Edit Sequence
In the Sequence Setting interface as shown in
Preview/Editing" area to open the sequence editing table, as shown in the figure
below.
DG900 Pro User Guide
74
Tabs
Figure 9.1 Sequence Setting Interface
Figure 9.1
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Channel Setup
. This chapter
Sequence
Preview/Editing
, click or tap the "Sequence