Coupling Setup
13
Coupling Setup
DG900 Pro supports frequency, amplitude, and phase coupling. Click or tap
Coupling to enter the "Coupling" menu.
In the "Coupling" menu, the Cpl Base displays the base channel for coupling. It is the
currently selected channel. You can select the other channel as the base channel.
When the coupling function is enabled, if the frequency, amplitude, or phase of one
channel is changed, the corresponding parameter of the other channel will be
adjusted automatically according to the specified deviation or ratio. This section
describes how to set coupling.
The coupling function is available only when the output mode of both channels is set
to Continuous. The following table shows the relationship between the coupling
mode and basic waveform.
(√ indicates available; × indicates not available)
Coupling
Function
Frequenc
y
Coupling
Amplitud
e
Coupling
Phase
Coupling
Frequency Coupling
Frequency coupling allows you to couple frequencies between channels, either by a
constant deviation or ratio between them.
DG900 Pro User Guide
90
Figure 13.1 "Coupling" Menu
Sine
Square Ramp
√
√
√
√
√
√
√
√
√
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Arb
Pulse
Noise
(not
DC)
×
×
×
×
√
√
×
×
×
>
Harmo
DC
nic
×
×
×
×
×
×