Rigol DG900 Pro Series User Manual page 21

Displays the menu labels, parameter settings, system state, prompt messages, and
other information.
2. Output Mode Selection Area
-
the current channel. Available modulated signals include AM, FM, PM, SUM,
ASK, FSK, PSK, and PWM signals. For details about the Modulation mode,
please refer to
-
current channel. For details about the Sweep mode, please refer to
-
channel. For details about the Burst mode, please refer to
3. Basic Waveform Selection Area
-
channel. For details about the Sine waveform, please refer to
Wave
-
current channel. For details about the Square waveform, please refer to
Output Square Wave
-
current channel. For details about the Pulse waveform, please refer to
Pulse
-
current channel. For details about the Ramp waveform, please refer to
Output Ramp Wave
-
channel. For details about Arb, please refer to
-
current channel. For details about the Noise, please refer to
4. Parameter Input Area
The parameter input area comprises a knob, a numeric keypad, unit keys, and
arrow keys. For details about the parameter input method, please refer to
Parameter Setting Method
5. Quick Operation Keys
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
: Modulation key. Press the key to set the output mode to Modulation for
Modulation
.
: Sweep key. Press the key to set the output mode to Sweep for the
: Burst key. Press the key to set the output mode to Burst for the current
: Sine key. Press the key to set the basic waveform to Sine for the current
.
: Square key. Press the key to set the basic waveform to Square for the
.
: Pulse key. Press the key to set the basic waveform to Pulse for the
.
: Ramp key. Press the key to set the basic waveform to Ramp for the
.
: Arb key. Press the key to set the basic waveform to Arb for the current
: Noise key. Press the key to set the basic waveform to Noise for the
.
Quick Start
Sweep
Burst
.
To Output Sine
To Output Arbitrary Waveforms
To Output Noise
DG900 Pro User Guide
.
To
To Output
To
.
.
13