•
Top: Selects the level at the top point of the carrier waveform as the idle level.
•
Center: Selects the level at the center point of the carrier waveform as the idle
level.
•
Bottom: Selects the level at the bottom point of the carrier waveform as the idle
level.
•
User: Selects the specified level as the idle level. When "User" is selected, click or
tap the Idle Level input field and use the pop-up numeric keypad to set the idle
level. It ranges from 0 to 65,535, and the default is 0.
TIP
When the noise is the carrier waveform, the idle level is fixed to 32768 and cannot be
modified.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Burst
DG900 Pro User Guide
73