Table of Contents
Advertisement
TIP
•
When the three IP configuration types are all turned on, the priority of the parameter
configuration from high to low is "DHCP", "Auto IP", and "Static IP".
•
The three IP configuration types cannot be all turned off at the same time.
MAC Address
Displays the MAC address by the instrument. For each instrument, the MAC address is
unique. When assigning the IP address for the instrument, the system uses the MAC
address to identify the instrument.
VISA Address
Displays the VISA address currently used by the instrument.
Apply the Network Parameter Setting
Click or tap Apply to validate the current network parameter setting.
17.2
LXI
In the Utility menu, click or tap LXI to enter the LXI setting menu and configure the
following parameters.
mDNS
Click or tap the mDNS on/off switch to enable or disable the multicast Domain Name
System (mDNS). This system is used to provide the function of DNS server for service
discovery in a small network without a DNS server.
Host Name
Click or tap the Host Name input field to set the host name. A maximum of 28-byte
strings can be supported. When mDNS is enabled, you can also input
"hostname.local" into the browser address bar to access Web Control.
Service Name
After the mDNS function is enabled, click or tap the Service Name input field to set
the service name.
17.3
Basic Settings
In the Utility menu, click or tap Setup to access the basic setting menu.
Language
This instrument supports two languages. Both Chinese and English are available for
the display of the help information, prompt messages, and interface. Click or tap the
drop-down button of Language to select the specified system language.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
System Utility Function Setting
DG900 Pro User Guide
99
Advertisement
Table of Contents
