17
System Utility Function Setting
In the "Utility" menu, you can set the I/O parameters and the system-related function
parameters. To enter the "Utility" menu, perform the following operations.
•
Click or tap the notification area at the lower-right corner of the interface to
enter the "Utility" menu.
•
Press the front-panel
•
Click or tap the function navigation icon
interface, and then select Utility to enter the "Utility" menu.
17.1
I/O Setting
In the Utility menu, click or tap I/O to enter the I/O setting menu to configure the
following parameters.
Network Status
Different prompts will be displayed according to the current network connection
status.
•
Network Config Succeeded!
•
Acquiring IP...
•
IP Conflict!
•
DISCONNECTED!
•
DHCP Config Failed
•
Read Status Fail!
•
CONNECTED
•
Invalid IP
•
IP lost
•
Please wait...
IP Configuration Type
The configuration type of the IP address can be DHCP, Auto IP, or Static IP. In different
IP configuration types, the configurations for IP address and other network
parameters are different.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
System Utility Function Setting
key to enter the "Utility" menu.
at the lower-left corner of the
DG900 Pro User Guide
97