System Utility Function Setting; I/O Setting - Rigol DHO1000 Series User Manual

20
20.1
1.888.610.7664
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

System Utility Function Setting

In the Utility menu, you can set the I/O parameters and the system-related function
parameters. You can enter the "Utility" menu in the following ways.
• Click or tap the Notification Area at the lower-right corner of the screen. Then
the Utility menu is displayed.
• Click or tap the function navigation icon
screen, and then select Utility to enter the Utility menu.

I/O Setting

In Utility menu, click or tap IO to enter the I/O setting menu to configure the
following parameters.
Network Status
Different prompts will be displayed according to the current network connection
status.
• Network Config Succeeded!
• Acquiring IP...
• IP Conflict!
• DISCONNECTED!
• DHCP Config Failed
• Read Status Fail!
• CONNECTED
• Invalid IP
• IP lost
• Please wait...
MAC Address
For each instrument, the MAC address is unique. When assigning the IP address for
the instrument, the system uses the MAC address to identify the instrument.
VISA Address
Displays the VISA address currently used by the instrument.
www.calcert.com
15
10 20
5 25
0 30
System Utility Function Setting
at the lower-left corner of the
sales@calcert.com
DHO1000 User Guide