Changing The Power Supply Plug; Figure 15. 9Vdc Universal Power Supply Components - ZiLOG eZ80F92 User Manual

eZ80F92 Development Kit
User Manual
52

Changing the Power Supply Plug

Changing the Power Supply Plug
Downloaded from Elcodis.com electronic components distributor
The universal 9VDC power supply offers three different plug configura-
tions and a tool that aids in removing one plug configuration to insert
another, as shown in Figure 15.

Figure 15. 9VDC Universal Power Supply Components

To exchange one plug configuration for another, perform the following
steps:
1. Place the tip of the removal tool into the round hole at the top of the
current plug configuration.
2. Press down to disengage the keeper tab and push the plug configura-
tion out of its slot.
3. Select the plug configuration appropriate for your location, and insert
it into the slot formerly occupied by the previous plug configuration.
4. Push the new plug configuration down until it snaps into place, as
indicated in Figure 16.
PRELIMINARY UM013904-0203