Advertisement
Quick Links
Introduction
This Quick Start Guide describes how to set up your Z8 Encore! XP
and start using it to build designs and applications.
Kit Contents
Hardware
•
One of the following:
–
Z8 Encore! XP
–
Z8 Encore! XP
–
Z8 Encore! XP
•
Smart Cable for PC to Z8 Encore!
•
(Z8F04A08100KIT development kits only) USB Smart Cable for PC to Z8 Encore!
Development Board and driver CD-ROM
•
Universal 5V power supply
Software (on CD-ROM)
•
ZDS II–Z8 Encore!
•
Sample code
•
Acrobat Reader install program
•
Document browser
Documentation
•
Registration Card
•
Z8 Encore! technical documentation (on CD-ROM)
–
Development Kit User Manual
–
ZDS II–IDE User Manual
–
eZ8 CPU User Manual
–
Product Specification
ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126
Downloaded from
Elcodis.com
electronic components distributor
Z8 Encore! XP
Microcontrollers
Development Kits
QS004303-0205
®
4K Series Development Board
®
4K Series 8-Pin Development Board
®
F08xA Series Development Board
®
IDE with ANSI C-Compiler
Telephone: 408.558.8500 • Fax: 408.558.8300 •
®
Family of
®
Development Board (DB9 to six-pin male)
Quick Start Guide
®
Development Kit
www.zilog.com
®
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ZiLOG Z8 Encore! XP Series
Summary of Contents for ZiLOG Z8 Encore! XP Series
- Page 1 Development Kit User Manual – ZDS II–IDE User Manual – eZ8 CPU User Manual – Product Specification ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126 Telephone: 408.558.8500 • Fax: 408.558.8300 • www.zilog.com Downloaded from Elcodis.com electronic components distributor...
- Page 2 ® Z8 Encore! XP Development Kits Quick Start Guide Page 2 – Product Brief – Application notes – Flyers – Product Line Card Requirements Table 1 lists the system requirements for running ZDS II. Table 1. ZDS II System Requirements Recommended Configuration Minimum Configuration •...
- Page 3 ® Z8 Encore! XP Development Kits Quick Start Guide Page 3 this kit, refer to the Z8F04A08100KIT Z8 Encore! XP™ 4K Series User Manual, UM0187. Note: Steps 3 and 4 below refer to installing the serial Z8 Encore! Smart Cable. For instructions on installing the Z8 Encore! USB Smart Cable, refer to the USB Smart Cable User Manual, UM0181, on the CD-ROM included with the development kit.
- Page 4 ® Z8 Encore! XP Development Kits Quick Start Guide Page 4 Serial Serial Port Smart Cable Host PC To Electrical Outlet Adapter Development Slot Board AC Cord Receptacle Universal Power Supply Figure 1. Development Board External Connections (Serial Z8 Encore! Smart Cable shown) For convenience, you can leave the adapter slot cover in place and plug in a standard com- puter equipment AC power cord (purchased separately) between the AC cord receptacle on the end of the power supply and an electrical outlet.
- Page 5 Next Unless you select a different location, the program is located in the menu under Start → Programs ZiLOG ZDS II Z8 Encore! <version> ZDS II Z8 Encore! <version> 7. After selecting , the screen appears. Follow the instruc- Next Register Your Software tions on the screen to complete the software registration.
- Page 6 ® Z8 Encore! XP Development Kits Quick Start Guide Page 6 5. Browse to the folder, located by default in: Samples c:\Program Files\ZiLOG\ZDSII_Z8Encore_<version>\Samples\ 6. In the folder, select the folder, then the folder, to Samples Z8Fxxxx_ledBlink access the project file.
- Page 7 ® Z8 Encore! XP Development Kits Quick Start Guide Page 7 8. Click the icon to build the project. Wait for the build to Rebuild All Rebuild complete. All Icon 9. Click the icon to connect and download the code to the Reset Reset development board.
- Page 8 TEST site direction. ® For more information about using ZDS II and building projects for your Z8 Encore! ® development kit, refer to the ZiLOG Developer Studio II–Z8 Encore! User Manual (UM0130). Getting Started Using ZDS II QS004303-0205 Downloaded from Elcodis.com...
- Page 9 Fax: 408.558.8300 www.ZiLOG.com Document Disclaimer ZiLOG is a registered trademark of ZiLOG Inc. in the United States and in other countries. All other products and/or service names mentioned herein may be trademarks of the companies with which they are associated.
Need help?
Do you have a question about the Z8 Encore! XP Series and is the answer not in the manual?
Questions and answers