Mounting The Module; Changing The Power Supply Plug; Figure 15. 9Vdc Universal Power Supply Components - ZiLOG eZ80L92 User Manual

eZ80L92 Development Kit
User Manual
54

Mounting the Module

Changing the Power Supply Plug

Mounting the Module
When mounting the eZ80L92 Module onto the eZ80
form, check its orientation to the platform to ensure a correct fit. Pin 1 of
JP1 on the eZ80L92 Module must align with pin 1 of JP1 on the eZ80
Development Platform; Pin 1 of JP2 on the eZ80L92 Module must align
with pin 1 of JP2 on the eZ80
The universal 9VDC power supply offers three different plug configura-
tions and a tool that aids in removing one plug configuration to insert
another, as shown in Figure 15.

Figure 15. 9VDC Universal Power Supply Components

To exchange one plug configuration for another, perform the following
steps:
1. Place the tip of the removal tool into the round hole at the top of the
current plug configuration.
2. Press down to disengage the keeper tab and push the plug configura-
tion out of its slot.
®
Development Platform, etc.
PRELIMINARY
®
Development Plat-
®
UM012906-0103