Using The Futurecom Repeater Configurator (Frc) Off-Line; Viewing Pdr8000 Personality Files; Modifying Pdr8000 Personality Files; Saving Pdr8000 Personality Files - Futurecom PDR8000 Programming Manual

8K088X04 R5.00
PDR8000® Portable Digital Repeater Programming Guide

Using the Futurecom Repeater Configurator (FRC) Off-Line

The Futurecom Repeater Configurator (FRC) can be used off-line to review, modify and save new
personality templates (dpd) files.

Viewing PDR8000 Personality Files

Run the Futurecom Repeater Configurator (FRC).
Select File → DPD Files (Templates) → Load DPD File and specify the dpd file location and name when
prompted.

Modifying PDR8000 Personality Files

Once a dpd file is successfully opened (as described in the previous section), the dpd settings are
available for reviewing and modification off-line.

Saving PDR8000 Personality Files

For saving the Personality files, make sure the Futurecom Repeater Configurator (FRC) is On-Line.
Power up the PDR8000. Connect the PDR8000 to the PC running the Futurecom Repeater Configurator
(FRC).
After editing the personality setting, the dpd file can be saved by selecting File → DPD Files (Templates)
→ Save DPD File and specifying a new or the same dpd file name and location.
2021-11-0
Page 15 of 98