Futurecom PDR8000 Programming Manual page 45

Field Name
Repeater Gate
Update
Repeater Gate
Startup State
Start up
Start on Last Active
Channel
Startup Channel
BSI Interval
Astro Fade Tolerance
2021-11-0
Options / Units
Disabled Specifies how the station determines
its state after a reset.
Enabled
Enabled: the station comes up in the
state last requested by the console
(Repeater Set Up or Repeater Knocked
Down)
Disabled: the station comes up in the
state specified by the Repeater Gate
Startup State field.
Repeat Set Up Specifies the station's state after a
Repeat Knocked reset: Repeat Set Up or Repeater
Down Knocked Down
Disabled Specifies if the PDR800 starts on the
last active channel after a reset.
Enabled
1-64 Specifies the channel to which
PDR8000 is set after a reset.
1
1-60 minutes Specifies the time interval at which the
FCC assigned station call sign is
30 min
broadcast.
1-3 frames Specifies the number of missed frames
before ASTRO message is considered
3
terminated.
PDR8000® Portable Digital Repeater Programming Guide
Description
8K088X04 R5.00
Notes
This field is only accessible when
Repeater Operation is set to
Repeater.
This field is only accessible when
Repeater Operation is set to
Repeater AND Repeater Gate
Update is Disabled.
This field is ignored when Startup
on Last Active Channel field is set
to Enabled.
Page 45 of 98