Futurecom PDR8000 Programming Manual page 36

NOTE:
The order of the Deployments can be rearranged by dragging and dropping the deployments in the list
of Deployments.
Field Name
Deployments order on the
PDR8000 Display
Deployment Information
Name
Enabled
Copy Deployment
Reset Deployment
Reset Order
Update Deployments
Close
If the user clicks "Close" and no modifications have been made to the deployment order or any
deployment name/enable status, the dialogue will close. If any of the aforementioned changes have
been made, the user will be prompted with this message:
2021-11-0
PDR8000® Portable Digital Repeater Programming Guide
Options /
Units
List of Deployments and theirs Status
Deployment name – up to 16 max
characters
Deployment enabled when checkbox is
checked
Allows to copy Deployment X configuration
to Deployment Y selected from the list.
Resets the currently selected Deployment
to Factory default.
Resets to factory order.
Update the Deployments as Configured
Prompts to confirm the changes made to
the Deployment before the window closes.
Description
8K088X04 R5.00
Notes
Enabled or Disabled
Deployment status is
displayed in the list of
Deployments.
Deployment 1 is
always enabled
Page 36 of 98