Futurecom PDR8000 Programming Manual page 43

Field Name
RT/RT Configuration
Packet Data
Repeat Packet Data
Wireline Data Drop
Out Delay
In-Cabinet Repeat
2021-11-0
Options / Units
Disabled Enabled Disabled: PDR8000 cannot be used in
RT/RT configuration.
Enabled: PDR8000 used in RT/RT
(back to back) configuration.
Disabled When Disabled Data is sent to
Infrastructure. When Enabled Data is
Enabled
repeated locally.
0 sec
Specifies the duration of the
transmission of idle packets following
0-255 sec
the transmission of an infrastructure
originated data packet.
PDR8000® Portable Digital Repeater Programming Guide
Description
8K088X04 R5.00
Notes
This field is enabled when
Wireline Interface is set to V.24.
Packet Data is not applicable to
DFSI deployments.
A value of 0 means disabled.
Page 43 of 98