7.1.7 COMMUNICATION
7.1.7.1
Modbus settings
Management
Choose the tower management mode associ‐
mode
ated with your controller. Master or Slave.
Input remote con‐
Input remote control / state selection, on this
trol
selection button you can choose the input
remote control / state.
To connect AEGIS S on the bus, the RS485 communication of
AEGIS S and other systems, connected on the same bus, must be
the same.
Fig. 54: User menu
Button MODBUS SLAVES is accessible depending
on the configuration of the MYPOOL communica‐
tion.
ETHERNET MODEM is inactive.
Fig. 55: Menu modbus settings
General Menu
49