Assembly and Installation
Fig. 22: Power Supply Output
4.11
RS485 communication bus connections
4.11.1
Connection to a USB port of a computer
Fig. 23: Communication bus connections
26
AEGIS S has a RS485 communication port to connect it to a com‐
puter equipped with a 485 port and a communication software to
record the measurement values, alarms and different states of the
device.
1.
Use a 3-wire cable.
2.
Wire AA' (n°3) of USB/485 converter to RS485 (A) (27).
3.
Wire BB' (n°4) of USB/485 converter to RS485 (B) (28).
4.
Wire C (n°5) of USB/485 converter to PWR (C) (15).
Blue (Terminal n°3): AA' RS485
n
White (Terminal n°4): BB' RS485
n
Black (Terminal n°5): GND RS485
n
Consider the bus wiring.
A USB/RS485 converter is recommended to connect the AEGIS S
to a computer. Please refer to converter documentation to realize
the connection.
A3769
A3770