Measurement Settings - ProMinent DULCOMETER Installation And Configuration Manual

Measuring and control unit aegis s for cooling water applications

Hide thumbs Also See for DULCOMETER:

Table of Contents

7.1.4 MEASUREMENT SETTINGS

Fig. 41: Menu digital input settings

DI1 – Function

Digital input operation mode selection. On this

selection button you will find the information of

the input in the process of modification (e. g.

DI1) and the currently selected function (e. g.

Water Flow switch).

Contact idle state Choice of idle state to be taken into account.

This check box contains the information cur‐

rently selected (e. g. NO).

Press to toggle NO (normally open) mode to

NC (normally closed) mode.

Activation delay

Enter the time that the input must remain

time

during its activation before the information is

taken into account.

Press to open the numeric keyboard and enter

the desired value.

Adjustment possible from 0 to 240 Second(s).

Deactivation

Same as before, but for reverse state.

delay time

In this menu the measurement channels can be configured.

If the option "Create a parameter automatically for

each sensor", the measurement channel are

preset. Please check the setup and adapt it if nec‐

essary.The order of the parameters is predefined.

General Menu

Table of Contents