Analog Input Settings - ProMinent DULCOMETER Installation And Configuration Manual

7.1.2 ANALOG INPUT SETTINGS

Create a This option enables the automatic creation of a meas‐
measure‐ urement channel in Measurement menu corre‐
ment sponding to the type of sensor is created automati‐
channel cally. The automatic generated measuring channel
automati‐ has to be checked and adapted to the application.
cally for
each
sensor
Activate If activated, it is possible to manage the condition type
the between the water circulation detector and the flow
advanced meters to turn on or off the conditioning. The logical
configu‐ condition AND / OR is then configurable in the CONDI‐
ration for TIONS menu.
flow
If not activated, the OR condition is active by default.
switch &
flow
meter
Activate This option allows to define the current generated in
the three special cases:
advanced
configu‐
ration of
the 4...
20mA
outputs
Inhibition Default mode
mode
0 mA
None
Low range
0 mA
2.6 mA
Low
range
3.4 mA
In the menu ANALOG INPUT SETTINGS the analog inputs are
configured depending on the connected sensors.
Fig. 35: Overview
The menu shows an overview of enabled and disabled analog
inputs.
General Menu
Range overflow
mode
Maximum
20 mA
20.8 mA
37