General Menu
7.2.5 TANK LEVEL
64
Fig. 73: Diagram increasing parameter
E04 Free clorine AI1 Parameter identification, includes informa‐
tion on parameter number (e. g. E04), type
(e. g. Free chlorine) and associated main
sensor input (e. g. AI1)
Setpoint
Enter the setpoint value.
Hysteresis
Enter the hysteresis value.
Mode
Dosage mode selection, on this selection
button we find the selected mode informa‐
tion (e. g. Hysteresis).
Base load
Enter the base load value.
This setting is only available if the unlock
option is enabled in the setting options.
The basic load leads to a permanent
dosing regardless of measured values.
This function is to be used with great care
to avoid overdosage.
Maximum time
Enter the maximum dosage time value.
Start limit
Enter the dosage power from which the
dosage time is counted. This setting is only
available if the unlock option is enabled in
the setting options.
Fig. 74: Diagram dosing needs parameter
In this menu limits of the tank levels can be configured.