Display; Date & Time - ProMinent DULCOMETER Installation And Configuration Manual

SOUNDS
COLORS
ALARMS
RESTORE

7.3.2 DISPLAY

7.3.3 DATE & TIME
Beep on screen Enables sound management at each valid
touch F tap on the screen.
Beep on alarm Enables the management of a beep every
second in case of a general alarm.
Sound adjustment requency and duration of the sound can be
adapted.
Alarm colour Measurement value of each parameter dis‐
played on the main screen thumbnails may
be displayed in a different color if the
parameter is on alarm.
Color adjustment You can change the color by varying its
components (RED – GREEN – BLUE).
This alarm selection is used to activate the "Alarm beep" and to
activate the alarm color of the LED. The system regroups the
alarms of all activate parameters before selecting the ones
checked below.
Sensor faults Selects sensor faults (Unstable & Out of
order sensors).
Alarm thresholds Selects parameter alarm thresholds (Low
Alarm & High Alarm).
Tank level Selects tank level(s) parameters.
Overdosing Selects parameters overdosage alarms
Buttons are only activated if factory configurations have been
changed.
Screen configuration Restore configuration options from Screen
section to factory configuration.
Sounds configura‐ Restore configuration options from Sounds
tion section to factory configuration.
Color configuration Restore configuration options from Color
section to factory configuration.
Alarms configuration Restore configuration options from Alarms
section to factory configuration.
In this menu the display settings can be configured.
Date and time settings can be adapted in this menu.
General Menu
69