General Menu
Measurement settings of analog input
7.1.5 OUTPUT SETTINGS
44
E03 – Tempera‐
Enables/disables the conductivity sensor.
ture: Measure‐
ment enabled
Sensor
Select the according input.
Unit
Select the unit for the measurement.
Decimal places
Select the number of decimals of the dis‐
played measured value.
Fig. 46: Menu measurement settings of analog input
Options of this menu depend on the selected parameter.
E04 – Parameter Selects the parameter or disables the meas‐
urement channel. The choice of measurement
is directly related to the configured input.
Sensor
Select the according input.
Unit
Select the unit for the measurement.
Decimal places
Select the number of decimals of the dis‐
played measured value.
Fig. 47: Menu output settings