Table of Contents
Advertisement
Care
If no washing machine is available:
Bath disinfection
Disinfect with Sekusept, Messrs. Henkel, for instance.
Observe manufacturer's
instructions.
Then rinse with clean water-preferably
from a soft
water supply-and
shake water out thoroughly. Allow
parts to dry well.
After rinsing steam-sterilize patient system and indi-
vidual parts at 134°C.
Or
l
Rinse patient system with clean water, preferably from
a soft water supply. Shake water out throroughly.
l
After rinsing thoroughly, dry patient system.
l
After drying, steam-sterilize at 134°C.
Sterilising
All other disassembled parts, and also the temperature
sensor, can then be sterilized:
l
Steam~steriliie parts at 134°C.
Do not use ethylene oxide for sterilization.
Advertisement
Table of Contents
