Electrical Supply; Connection To Other Equipment - Dräger Evita 2 Instructions For Use Manual

Preparation
Electrical power
supply
Mains voltage must correspond to voltage range given on
plate on back.
either:
220vto24ov
or : 1M)V to 127 V
l
Insert mains connector.
Socket strip for ancillary equipment
Connecting equipment to extension sockets may lead to
an increase iri current leakage to the patient beyond the
permissible values in the event of earth failure. There may
then be an increased electrical risk.
Connection
to other equipment
-
via optional RS 232 interface.
Connecting electronics to earth:
l Slide switch (back of machine) upwards
l Do not earth the electronics of the other equipment
connected to Evita 2.
When no equipment connected to Evita 2
l Slide switch downwards.
12
A 43