Alarms - Dräger Evita 2 Instructions For Use Manual

Betrieb
Alarms
1 The
red alarm light flashes, accompanied by alarm
sound.
2 Alarm message is displayed on the screen.
l Rectify fault, use 'Fault-Cause-Remedy' list, page
104to106.
When fault is rectified, the alarm sound ceases.
Acknowledging alarm message:
3
Press @%l button, the alarm message disappears
from the screen.
The alarm sound can be suppressed for 2 minutes:
4
Keep @?I button pressed until the yellow LED is lit.
02 alarm
Calibrate 02 sensor, page 17,
or:
replace 02 sensor, page 8.
Switching off 02 monitoring in exceptional cases
5 Press B=G button. yellow LED flashes:
lzzl
01 monitoring is switching off permanently.
Switching 02 monitoring on again:
5 Press .M button again, yellow LED goes out.
rl
80