After Reprocessing; Assembling And Fitting Device-Specific; Components; Preparation Before Next Use Of Device - Dräger Infinity Acute Care System Instructions For Use Manual

Dräger states that oxygen-releasing agents and
chlorine-releasing agents may cause color change
in some materials. Color change does not indicate
that the product is not functioning correctly.

After reprocessing

Assembling and fitting device-specific

components

Prerequisite:
– All components have been reprocessed and
dried.
After the equipment is cleaned, inspect it and en-
sure that the power supply units are in good work-
ing condition. To do this, follow the guidelines be-
low:
 Make sure that the environment and power sup-
ply meet specifications.
 Inspect all power cords for damage, and make
sure that the insulation is in good condition.
 Inspect the equipment for mechanical damage.
In case of any damage or abnormality, do not
use the equipment. Contact the hospital's ser-
vice personnel or your service personnel imme-
diately.

Preparation before next use of device

Checking the operational readiness
Prerequisite:
– The device has been assembled and prepared
so that it is ready for operation.
Instructions for use - Infinity ® Acute Care System - Infinity
Other surface disinfectants are used at one's own
risk.
Procedure:
 Check the operational readiness. For more in-
formation, see the "Getting started" chapter of
the instructions for use entitled Infinity Acute
Care System – Monitoring applications.
® Medical Cockpits
Reprocessing
43