Care
Removing flow sensor
,.
1 Push sensor to the left as far as it will go
and
2
pull out.
If contamination
may have occurred:
l
remove and discard flow sensor.
If not,
l
re-use flow sensor after calibration.
The Row sensor cannot be sterilized and cannot be
disinfected.
Detaching
patient system
l
Push catch to the right and simultaneously pull off
patient system.
Only strip down patient system ff badly soiled
.
Unscrew stopper by hand and remove together with
the diaphragm.
l
Do not disassemble patient system any further.