LTF Time Of Flight Laser Distance Sensor With IO-Link Instruction Manual
Input Type
SyncMstr
SyncSlve
Disabled
Input Active
The Active option sets the active state of the remote input. Use the Active options to change the active input to Low or High.
Navigate: MENU › INPUT › Active
Remote Input: Not available
Default: Low
Input Active
Low
High
Measure Menu (MEASURE)
Use this menu to view or change the:
•
Speed
Speed
The Speed option sets the speed at which the measurement is calculated. This process uses averaging in the digital pro-
cessing of the signal to calculate the measurement. A slower speed increases the response time of the sensor but improves
the repeatability. Refer to the repeatability specifications for each speed.
Navigate: MENU › MEASURE › Speed
Remote Input: Not available
Default: Medium
28
Continued from page 27
The remote input is used as the Master Sync output to an attached Slave sensor (see " Sync Master/
Slave " on page
35).
The remote input is used as the Slave Sync input from an attached Master sensor (see " Sync Master/
Slave " on page
35).
The remote input is disabled.
The remote input detects low (0 V) inputs and high-to-low transitions. (Default)
The remote input detects high (V+) inputs and low-to-high transitions.
MENU MEASURE
Select Menu Item
or
Press to Save Setting
Go Back to Parent Menu
or
Press and Hold to Go Back
to Run Mode
© Banner Engineering Corp.
Description
Description
Measure Menu Map
MEASURE Speed
Speed Fast
Speed Standard
Speed Medium
Speed Slow
Default Setting
June 22, 2023