Ats (8D) Operation Description - Huawei UPS5000-E User Manual

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Figure 2-25 Delay status
(1) Delay name
(3) Local control mode
Figure 2-26 Secondary load status
(1) OFF
Note that the secondary load status (ON/OFF) in the menu is consistent with the
input data. For example: If the input data (DI 11 by default) is active, the
secondary load is switched on. If the input data is invalid, the secondary load is
switched off.

2.4.3 ATS (8D) Operation Description

The ATS (8D) supports three operation modes: manual mode, automatic mode,
and button mode. This section describes the operation modes in detail.
● Do not open any cover of the product. Even if the power supply is disconnected,
● Do not adjust the control cable when the ATS or external control cable is
Issue 06 (2023-08-25)
NO TICE
NO TICE
hazardous external control voltage may still exist inside the product.
electrified.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(2) Remaining time
(4) Remote control mode
(2) ON
2 Product Overview
55