Huawei UPS5000-E User Manual page 109

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Context
● Cables can be routed in and out from the bottom only when a tail frame is
● The ATS cabinet is used as an example. For details about cable connections for
● Connect the internal cables first, and then the external cables.
Procedure
Step 1 Remove the cover plate from the cable hole at the bottom of the tail frame.
Step 2 Remove the insulation panel from the rear of the cabinet.
Step 3 Connect a ground cable to the UPS cabinet.
Figure 4-32 Connecting a ground cable to the UPS cabinet
Step 4 Connect two AC input power cables to input terminals 1L1, 1L2, 1L3, 1N and 2L1,
2L2, 2L3, 2N respectively in the UPS cabinet.
Issue 06 (2023-08-25)
NO TICE
installed on the cabinet.
other cabinets, refer to the cable connections for the ATS cabinet.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
101