Huawei UPS5000-E User Manual page 132

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Item
Voltage (V)
Current (A)
Temperature (°C) (only for
lead-acid batteries)
Backup time (min)
Remaining cap. (%)
SOH
Maximum cell temperature
(°C) (only for lithium
batteries)
Min cell temperature (°C)
(only for lithium batteries)
Table 5-8 Total Runtime
Item
Bypass runtime (h)
Inv. runtime (h)
Table 5-9 Environment Data
Item
Ambient temp. (°C)
Issue 06 (2023-08-25)
NO TE
The value takes an integer. For example:
● If the value is less than 1, the value takes 0.
● If the value is greater than or equal to 1 and less than 2, the value takes 1.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
Voltage of the battery string
Current of the battery string (the current is +
when batteries are being charged and – when
discharged)
Current operating temperature of the battery (A
battery sensor is required. If no sensor is
connected, N/A is displayed.)
Estimated battery backup time at the current load
Remaining battery capacity
Battery state of health
-
-
Description
Total time during which the UPS runs in bypass
mode
Total time during which the UPS runs in inverter
mode
Description
Temperature measured by the ambient
temperature and humidity sensor. (An ambient
temperature and humidity sensor is required. If no
sensor is connected, the ambient temperature
sampled by the bypass module is displayed.)
5 LCD Interface
124