Huawei UPS5000-E User Manual page 106

UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Step 5 Connect AC output power cables. (Connect output power cables to the customer
terminal bars in the UPS cabinet in sequence. The N bar and PE bar on the left
and right sides should be connected.)
● Connect output power cables to the UPS from inside out and from the top
● Output power cables are connected in the same way for the 60 kVA and 125
Figure 4-28 Output N cables and PE cables
(1) N cables
Issue 06 (2023-08-25)
Figure 4-27 Installing PC panels
NO TICE
down. Connect the PE cable, N cable, and L cable in sequence.
kVA cabinets. The UPS5000-E-125K-HASBS-01 cabinet is used as an example.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
(2) PE cables
98