Saving money and the environment
Use
To
Energy/Paper Use all the settings associated with Energy and Paper modes.
Paper
•
•
2
Press
.
Reducing printer noise
Use Quiet Mode to reduce the printer noise.
1
From the printer control panel, navigate to:
> Settings >
Use
On
Off
2
Press
.
Adjusting Sleep mode
To save energy, decrease the number of minutes before the printer enters Sleep mode. You can choose from
1 to 60 minutes. The factory default setting is 30 minutes.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Timeouts.
Enable the automatic two‑sided (duplex) printing feature.
Turn off print log features.
> General Settings >
> Quiet Mode >
> select a setting you want
To
Reduce printer noise.
•
Print jobs will process at a reduced speed.
•
Printer engine motors do not start until a document
is ready to print. There is a short delay before the
first page is printed.
•
The alarm control and cartridge alarm sounds are
turned off.
•
The printer will ignore the Advance Start command.
Use factory default settings. This setting supports the
performance specifications of the printer.
Note: Selecting Photo from the printer driver may
disable Quiet Mode and provide better print quality
and full speed printing.
89