Pantum CP2500 Series User Manual page 130

Troubleshooting
Maintenance kit nearly low [80.xy]
For more information, contact customer support or your service representative, and then report the
message.
If necessary, press
Maintenance kit very low [80.xy]
You may need to replace the maintenance kit very soon. For more information, contact customer support
or your service representative.
If necessary, press
Memory full [38]
Try one or more of the following:
•
From the printer control panel, press
•
Decrease the resolution setting.
•
Install additional printer memory.
Memory low, no Resource Save [35]
Try one or more of the following:
•
From the printer control panel, press
printing.
•
Install additional printer memory.
Network error, port [x] [54]
Try one or more of the following:
•
From the printer control panel, press
•
Unplug the router, wait for 30 seconds, and then plug it back again.
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or the print server. For more information, contact customer
support.
Network error, standard port [54]
Try one or more of the following:
•
From the printer control panel, press
•
Unplug the router, wait for 30 seconds, and then plug it back again.
on the printer control panel to clear the message and continue printing.
on the printer control panel to clear the message and continue printing.
to clear the message.
to disable Resource Save, clear the message, and continue
to clear the message and continue printing.
to clear the message and continue printing.
130