Pantum CP2500 Series User Manual page 133

Troubleshooting
Replace missing [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Install the indicated imaging kit to clear the message. For more information, see the "Replacing supplies"
section of the User's Guide.
Replace missing waste toner bottle [31.xyz]
Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet
that came with the supply.
Replace [type] imaging kit, 0 estimated pages remain [84.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the indicated imaging kit to clear the message and continue printing. For more information, see
the instruction sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then visit our Web site or contact the place where
you purchased the printer.
Replace unsupported [color] cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message.
Note: If you do not have a replacement cartridge, then visit our Web site or contact the place where you
purchased the printer.
Replace unsupported [type] imaging kit [32.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Remove the indicated imaging kit, and then install a supported one to clear the message.
Note: If you do not have a replacement imaging kit, then visit our Web site or contact the place where
you purchased the printer.
Replace waste toner bottle [82.xy]
Replace the waste toner bottle to clear the message.
Supply needed to complete job
A supply needed to complete the job is missing. Cancel the current job.
Too many trays. Remove some. [58]
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
133