Table of Contents
Advertisement
Understanding printer menus
Use
Press and Hold Sleep Button
Do Nothing
Sleep
Hibernate
Factory Defaults
Do Not Restore
Restore Now
Export Configuration File
Export
Print settings
Setup menu
Use
Printer Language
PCL Emulation
PS Emulation
Print Area
Normal
Fit To Page
Whole Page
Printer Usage
Max Yield
Max Speed
Black Only Mode
On
Off
To
Determine how the printer, while in idle state, reacts to a long
press of the Sleep button.
Note: Do Nothing is the factory default setting.
Use the printer factory default settings.
Notes:
•
Do Not Restore is the factory default setting.
•
Restore Now sets all printer settings to the factory
default settings except for the Network/Ports menu
settings. All downloads stored in the RAM are deleted.
Downloads stored in the flash memory or on a hard disk
are not affected.
Export configuration files to a flash drive.
To
Set the default printer language.
Notes:
•
PS Emulation is the factory default setting. PS Emulation
uses a PS interpreter for processing print jobs.
•
PCL Emulation uses a PCL interpreter for processing
print jobs.
•
This does not prevent a software program from sending
print jobs that use another printer language.
Set the logical and physical printable area.
Note: Normal is the factory default setting. When attempting
to print data in the non‑printable area defined by the Normal
setting, the printer clips the image.
Set color toner use in printing.
Note: Max Yield is the factory default setting.
Set the printer to print text and graphics using only the black
toner cartridge.
Notes:
•
Off is the factory default setting.
•
This does not affect the ability of the printer to generate
color output from flash drive print jobs.
75
Advertisement
Table of Contents
