Pantum CP2500 Series User Manual page 129

Troubleshooting
Load Manual Feeder with [custom string]
Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the printer control panel, press
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then
prints from an automatically selected tray.
•
Cancel the current job.
Load Manual Feeder with [custom type name]
Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the printer control panel, press
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then
prints from an automatically selected tray.
•
Cancel the current job.
Load Manual Feeder with [paper size]
Try one or more of the following:
•
Load the feeder with the correct size of paper.
•
From the printer control panel, press
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then
prints from an automatically selected tray.
•
Cancel the current job.
Load Manual Feeder with [paper type] [paper size]
Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the printer control panel, press
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then
prints from an automatically selected tray.
•
Cancel the current job.
Maintenance kit low [80.xy]
You may need to order a maintenance kit. For more information, contact customer support or your service
representative, and then report the message.
If necessary, press on the printer control panel to clear the message and continue printing.
to clear the message and continue printing.
to clear the message and continue printing.
to clear the message and continue printing.
to clear the message and continue printing.
129